features small size stable breakdown voltage high bandwidth rohs compliant* applications telecom datacom industrial electronics g5000 and g6000 series overvoltage protectors *rohs compliant *rohs directive 2002/95/ec jan 27 2003 including annex. speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications electrical characteristics symbol parameter test conditions value unit v br maximum end-of-life impulse sparkover voltage g5000as 10/1000 s, 1000 v, 100 a 2/10 s, 2500 v, 500 a 2/10 s, 5000 v, 500 a 10/700 s, 6000 v, 240 a 1600 v G5200AS 10/1000 s, 1000 v, 100 a 2/10 s, 5000 v, 500 a 10/700 s, 6000 v, 240 a 850 g5500as 2/10 s, 800 v, 100 a 2/10 s, 1500 v, 100 a 650 g6000as 2/10 s, 6000 v, 500 a 650 v dc minimum end-of-life dc breakover voltage g5000as r=1 m , 500 v/s 900 v G5200AS g5500as g6000as r=51k , 500 v/s r=51k , 500 v/s r=51k , 500 v/s 400 200 200 i surge maximum surge rating with 8/20 s waveform ? 2 ka c max maximum capacitance (1 mhz) ? 0.3 pf r ins minimum insulation resistance ? 10 m thermal conditions symbol parameter min. unit t op operating temperature range -40 to +85 c t stg storage temperature range -40 to +85 c product dimensions a b dd dimensions: mm (inches) dim. min. max. a 2.40 (.094) 3.00 (.118) b 4.20 (.165) 4.80 (.189) c 2.90 (.114) 3.50 (.138) d 0.60 (.024) 0.70 (.028) c recommended pad layout 3.40 (.139) 2.70 (.106) 2.15 (.085) 2.15 (.085) 3.40 (.139) packaging: 3000 pieces per reel typical part marking h5xx marking number 11xx = g5000as h5xx = G5200AS h3xx = g5500as h2xx = g6000as how to order g 5200 as form factor g = gas discharge tube series 5000 5200 5500 6000 rating form factor as = 2 ka rating, surface mount
speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications g5000 and g6000 series overvoltage protectors typical applications p40 gdt gdt tbu? device tbu? device equip. tbu gdt c650-xxx g5500as c650-xxx g6000as c850-xxx G5200AS telecom, industrial and other general electronics p40 v cc g5000as g5000as p40-g adsl, vdsl and vdsl2 G5200AS G5200AS G5200AS G5200AS p850-u p850-u p850-u p850-u rj 45 connector 2000 v, 20 pf tx rx tx rx ethernet
speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications g5000 and g6000 series overvoltage protectors standard soldering condition 300 220 180 260 200 150 100 time (seconds) reflow soldering system 50 0 t1 t2 temperature (c) preheat heating cool down flow soldering system 300 260 200 150 100 time (seconds) flow soldering temperature profile 50 0 t1 t2 temperature (c) 80 250 preheat heating cool down soldering iron temperature: 350 c 5 c time: 5 1 sec. item condition preheat t 1 : 150 - 180 c 60-90 sec. heating t 2 : 220 - 260 c 30-60 sec. peak temperature 260 c cool down cooling after soldering should be as gradual as possible. item condition preheat t 1 : 80 - 150 c 120-180 sec. heating t 2 : 250 - 260 c 10 1 sec. peak temperature 260 c cool down cooling after soldering should be as gradual as possible.
speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications 3312 - 2 mm smd trimming potentiometer asia-paci c: tel: +886-2 2562-4117 fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 fax: +1-951 781-5700 www.bourns.com g5000 and g6000 series overvoltage protectors rev. 09/09 packaging speci cations (per eia468-b) b a d c n f g (measured at hub) user direction of feed k 0 b 0 p 2 d 1 center lines of cavity embossment t d p 0 top cover tape e w p a 0 dimensions: mm (inches) a b c d g n min. max. min. max. min. max. min. max. ref. ref. 328 (12.913) 332 (13.071) 1.5 (.059) 2.5 (.098) 12.5 (.492) 13.5 (.531) 20.2 (.795) 21.8 (.858) 13.5 (.531) 80 (3.150) a 0 b 0 d d 1 e f min. max. min. max. min. max. min. max. min. max. min. max. 3.4 (.134) 3.8 (.150) 4.7 (.185) 5.1 (.201) 1.5 (.059) 1.6 (.063) 1.5 (.059) 1.8 (.071) 1.65 (.065) 1.85 (.073) 5.45 (.215) 5.55 (.219) k 0 p p 0 p 2 t w min. max. min. max. min. max. min. max. min. max. min. max. 2.6 (.102) 3.0 (.118) 7.9 (.311) 8.1 (.319) 3.9 (.159) 4.1 (.161) 1.9 (.075) 2.1 (.083) 0.2 (.008) 0.4 (.016) 11.7 (.461) 12.3 (.484)
|